-- Network Working Group G. Bathrick
-- Request for Comments: 2662 AG Communication Systems
-- Category: Standards Track F. Ly
-- Copper Mountain Networks
-- August 1999
--
--
-- Definitions of Managed Objects for the ADSL LinesADSL-TC-MIB DEFINITIONS::=BEGINIMPORTStransmission,MODULE-IDENTITY,Gauge32FROM SNMPv2-SMI
TEXTUAL-CONVENTIONFROM SNMPv2-TC;adsltcmib MODULE-IDENTITYLAST-UPDATED"9908190000Z"ORGANIZATION"IETF ADSL MIB Working Group"CONTACT-INFO"
Gregory Bathrick
AG Communication Systems
A Subsidiary of Lucent Technologies
2500 W Utopia Rd.
Phoenix, AZ 85027 USA
Tel: +1 602-582-7679
Fax: +1 602-582-7697
E-mail: bathricg@agcs.com
Faye Ly
Copper Mountain Networks
Norcal Office
2470 Embarcadero Way
Palo Alto, CA 94303
Tel: +1 650-858-8500
Fax: +1 650-858-8085
E-Mail: faye@coppermountain.com
IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
"DESCRIPTION"The MIB module which provides a ADSL
Line Coding Textual Convention to be used
by ADSL Lines."-- Revision historyREVISION"9908190000Z"-- 19 August 1999, midnightDESCRIPTION"Initial Version, published as RFC 2662"
--PSIM ::= { transmission 94 2 } -¤- adslMIB 2::={ transmission adslMIB(94)2}AdslLineCodingType::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This data type is used as the syntax for the ADSL
Line Code."SYNTAXINTEGER{other(1),-- none of the followingdmt (2),-- Discrete MultiTonecap (3),-- Carrierless Amplitude & Phase modulationqam (4)-- Quadrature Amplitude Modulation}AdslPerfCurrDayCount::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A counter associated with interface performance
measurements in a current 1-day (24 hour) measurement
interval.
The value of this counter starts at zero at the
beginning of an interval and is increased when
associated events occur, until the end of the
1-day interval. At that time the value of the
counter is stored in the previous 1-day history
interval, if available, and the current interval
counter is restarted at zero.
In the case where the agent has no valid data available
for this interval the corresponding object
instance is not available and upon a retrieval
request a corresponding error message shall be
returned to indicate that this instance does
not exist (for example, a noSuchName error for
SNMPv1 and a noSuchInstance for SNMPv2 GET
operation)."SYNTAXGauge32AdslPerfPrevDayCount::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A counter associated with interface performance
measurements during the most previous 1-day (24 hour)
measurement interval. The value of this counter is
equal to the value of the current day counter at
the end of its most recent interval.
In the case where the agent has no valid data available
for this interval the corresponding object
instance is not available and upon a retrieval
request a corresponding error message shall be
returned to indicate that this instance does
not exist (for example, a noSuchName error for
SNMPv1 and a noSuchInstance for SNMPv2 GET
operation)."SYNTAXGauge32AdslPerfTimeElapsed::=TEXTUAL-CONVENTION
STATUScurrentDESCRIPTION"The number of seconds that have elapsed since
the beginning of the current measurement period.
If, for some reason, such as an adjustment in the
system's time-of-day clock, the current interval
exceeds the maximum value, the agent will return
the maximum value."SYNTAXGauge32ENDADSL-LINE-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter32,Gauge32,NOTIFICATION-TYPE,transmission,Unsigned32FROM SNMPv2-SMI
RowStatus,TruthValue,VariablePointerFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
ifIndex FROM IF-MIB
PerfCurrentCount,PerfIntervalCountFROM PerfHist-TC-MIB
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
AdslPerfCurrDayCount,AdslPerfPrevDayCount,AdslPerfTimeElapsed,AdslLineCodingTypeFROM ADSL-TC-MIB
;adslMIB MODULE-IDENTITYLAST-UPDATED"9908190000Z"ORGANIZATION"IETF ADSL MIB Working Group"CONTACT-INFO"
Gregory Bathrick
AG Communication Systems
A Subsidiary of Lucent Technologies
2500 W Utopia Rd.
Phoenix, AZ 85027 USA
Tel: +1 602-582-7679
Fax: +1 602-582-7697
E-mail: bathricg@agcs.com
Faye Ly
Copper Mountain Networks
Norcal Office
2470 Embarcadero Way
Palo Alto, CA 94303
Tel: +1 650-858-8500
Fax: +1 650-858-8085
E-Mail: faye@coppermountain.com
(ADSL Forum input only)
John Burgess
Predictive Systems, Inc.
25A Vreeland Rd.
Florham Park, NJ 07932 USA
Tel: +1 973-301-5610
Fax: +1 973-301-5699
E-mail: jtburgess@predictive.com
IETF ADSL MIB Working Group (adsl@xlist.agcs.com)
"DESCRIPTION"The MIB module defining objects for the management of a pair of
ADSL modems at each end of the ADSL line. Each such line has
an entry in an ifTable which may include multiple modem lines.
An agent may reside at either end of the ADSL line however the
MIB is designed to require no management communication between
them beyond that inherent in the low-level ADSL line protocol.
The agent may monitor and control this protocol for its needs.
ADSL lines may support optional Fast or Interleaved channels.
If these are supported, additional entries corresponding to the
supported channels must be created in the ifTable. Thus an ADSL
line that supports both channels will have three entries in the
ifTable, one for each physical, fast, and interleaved, whose
ifType values are equal to adsl(94), fast(125), and
interleaved(124), respectively. The ifStackTable is used to
represent the relationship between the entries.
Naming Conventions:
Atuc -- (ATUC) modem at near (Central) end of line
Atur -- (ATUR) modem at Remote end of line
Curr -- Current
Prev -- Previous
Atn -- Attenuation
ES -- Errored Second.
LCS -- Line Code Specific
Lof -- Loss of Frame
Lol -- Loss of Link
Los -- Loss of Signal
Lpr -- Loss of Power
xxxs-- interval of Seconds in which xxx occurs
(e.g., xxx=Lof, Los, Lpr)
Max -- Maximum
Mgn -- Margin
Min -- Minimum
Psd -- Power Spectral Density
Snr -- Signal to Noise Ratio
Tx -- Transmit
Blks-- Blocks, a data unit, see
adslAtuXChanCrcBlockLength
"-- Revision historyREVISION"9908190000Z"-- 19 August 1999, midnightDESCRIPTION"Initial Version, published as RFC 2662"::={ transmission 94}adslLineMib OBJECTIDENTIFIER::={ adslMIB 1}adslMibObjects OBJECTIDENTIFIER::={ adslLineMib 1}-- objectsadslLineTable OBJECT-TYPESYNTAXSEQUENCEOF AdslLineEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table includes common attributes describing
both ends of the line. It is required for all ADSL
physical interfaces. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 1}adslLineEntry OBJECT-TYPESYNTAX AdslLineEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in adslLineTable."INDEX{ ifIndex }::={ adslLineTable 1}
AdslLineEntry ::=SEQUENCE{
adslLineCoding AdslLineCodingType,
adslLineType INTEGER,
adslLineSpecific VariablePointer,
adslLineConfProfile SnmpAdminString,
adslLineAlarmConfProfile SnmpAdminString}adslLineCoding OBJECT-TYPESYNTAXAdslLineCodingTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Specifies the ADSL coding type used on this
line."::={ adslLineEntry 1}adslLineType OBJECT-TYPESYNTAXINTEGER{noChannel (1),-- no channels existfastOnly (2),-- fast channel exists onlyinterleavedOnly (3),-- interleaved channel exists-- onlyfastOrInterleaved (4),-- either fast or interleaved-- channels can exist, but-- only one at any timefastAndInterleaved (5)-- both fast or interleaved-- channels exist}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Defines the type of ADSL physical line
entity that exists, by defining whether and how
the line is channelized. If the line is channelized,
the value will be other than noChannel(1). This
object defines which channel type(s) are supported.
In the case that the line is channelized, the manager
can use the ifStackTable to determine the ifIndex for
the associated channel(s)."::={ adslLineEntry 2}adslLineSpecific OBJECT-TYPESYNTAXVariablePointerMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"OID instance in vendor-specific MIB. The Instance may
be used to determine shelf/slot/port of the ATUC
interface in a DSLAM."::={ adslLineEntry 3}adslLineConfProfile OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value of this object identifies the row
in the ADSL Line Configuration Profile Table,
(adslLineConfProfileTable), which applies for this
ADSL line, and channels if applicable.
For `dynamic' mode, in the case which the
configuration profile has not been set, the
value will be set to `DEFVAL'.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only."::={ adslLineEntry 4}adslLineAlarmConfProfile OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value of this object identifies the row
in the ADSL Line Alarm Configuration Profile Table,
(adslLineAlarmConfProfileTable), which applies to this
ADSL line, and channels if applicable.
For `dynamic' mode, in the case which the
alarm profile has not been set, the
value will be set to `DEFVAL'.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only."::={ adslLineEntry 5}adslAtucPhysTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucPhysEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUC.
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 2}adslAtucPhysEntry OBJECT-TYPESYNTAX AdslAtucPhysEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry in the adslAtucPhysTable."INDEX{ ifIndex }::={ adslAtucPhysTable 1}
AdslAtucPhysEntry ::=SEQUENCE{
adslAtucInvSerialNumber SnmpAdminString,
adslAtucInvVendorID SnmpAdminString,
adslAtucInvVersionNumber SnmpAdminString,
adslAtucCurrSnrMgn INTEGER,
adslAtucCurrAtn Gauge32,
adslAtucCurrStatus BITS,
adslAtucCurrOutputPwr INTEGER,
adslAtucCurrAttainableRate Gauge32}-- inventory group---- These items should describe the lowest level identifiable-- component, be it a stand-alone modem, a card in a rack,-- a child-board, etc.--adslAtucInvSerialNumber OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor specific string that identifies the
vendor equipment."::={ adslAtucPhysEntry 1}adslAtucInvVendorID OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..16))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters."REFERENCE"ANSI T1.413[10]"::={ adslAtucPhysEntry 2}adslAtucInvVersionNumber OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..16))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The vendor specific version number sent by this ATU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters."REFERENCE"ANSI T1.413[10]"::={ adslAtucPhysEntry 3}-- current status group--adslAtucCurrSnrMgn OBJECT-TYPESYNTAXINTEGER(-640..640)UNITS"tenth dB"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Noise Margin as seen by this ATU with respect to its
received signal in tenth dB."::={ adslAtucPhysEntry 4}adslAtucCurrAtn OBJECT-TYPESYNTAXGauge32(0..630)UNITS"tenth dB"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU."::={ adslAtucPhysEntry 5}adslAtucCurrStatus OBJECT-TYPESYNTAXBITS{noDefect(0),lossOfFraming(1),lossOfSignal(2),lossOfPower(3),lossOfSignalQuality(4),lossOfLink(5),dataInitFailure(6),configInitFailure(7),protocolInitFailure(8),noPeerAtuPresent(9)}MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Indicates current state of the ATUC line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming ATUC failure due to not
receiving valid frame.
2 lossOfSignal ATUC failure due to not
receiving signal.
3 lossOfPower ATUC failure due to loss of
power.
Note: the Agent may still
function.
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the bit-error-rate
exceeds 10^-7.
5 lossOfLink ATUC failure due to inability
to link with ATUR.
6 dataInitFailure ATUC failure during
initialization due to bit
errors corrupting startup
exchange data.
7 configInitFailure ATUC failure during
initialization due to peer
ATU not able to support
requested configuration
8 protocolInitFailure ATUC failure during
initialization due to
incompatible protocol used by
the peer ATU.
9 noPeerAtuPresent ATUC failure during
initialization due to no
activation sequence detected
from peer ATU.
This is intended to supplement ifOperStatus."::={ adslAtucPhysEntry 6}adslAtucCurrOutputPwr OBJECT-TYPESYNTAXINTEGER(-310..310)UNITS"tenth dBm"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence."::={ adslAtucPhysEntry 7}adslAtucCurrAttainableRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate."
::={ adslAtucPhysEntry 8}adslAturPhysTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturPhysEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 3}adslAturPhysEntry OBJECT-TYPESYNTAX AdslAturPhysEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAturPhysTable."INDEX{ ifIndex }::={ adslAturPhysTable 1}
AdslAturPhysEntry ::=SEQUENCE{
adslAturInvSerialNumber SnmpAdminString,
adslAturInvVendorID SnmpAdminString,
adslAturInvVersionNumber SnmpAdminString,
adslAturCurrSnrMgn INTEGER,
adslAturCurrAtn Gauge32,
adslAturCurrStatus BITS,
adslAturCurrOutputPwr INTEGER,
adslAturCurrAttainableRate Gauge32}-- inventory group--adslAturInvSerialNumber OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor specific string that identifies the
vendor equipment."::={ adslAturPhysEntry 1}adslAturInvVendorID OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..16))MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters."REFERENCE"ANSI T1.413"::={ adslAturPhysEntry 2}adslAturInvVersionNumber OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..16))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor specific version number sent by this ATU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters."REFERENCE"ANSI T1.413"::={ adslAturPhysEntry 3}-- current status group--adslAturCurrSnrMgn OBJECT-TYPESYNTAXINTEGER(-640..640)UNITS"tenth dB"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Noise Margin as seen by this ATU with respect to its
received signal in tenth dB."::={ adslAturPhysEntry 4}adslAturCurrAtn OBJECT-TYPESYNTAXGauge32(0..630)UNITS"tenth dB"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU."::={ adslAturPhysEntry 5}adslAturCurrStatus OBJECT-TYPESYNTAXBITS{noDefect(0),lossOfFraming(1),lossOfSignal(2),lossOfPower(3),
lossOfSignalQuality(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates current state of the ATUR line. This is a
bit-map of possible conditions. Due to the isolation
of the ATUR when line problems occur, many state
conditions like loss of power, loss of quality signal,
and initialization errors, can not be determined.
While trouble shooting ATUR, also use object,
adslAtucCurrStatus. The various bit positions are:
0 noDefect There no defects on the line
1 lossOfFraming ATUR failure due to not
receiving valid frame
2 lossOfSignal ATUR failure due to not
receiving signal
3 lossOfPower ATUR failure due to loss of
power
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the
bit-error-rate exceeds 10^-7.
This is intended to supplement ifOperStatus."::={ adslAturPhysEntry 6}adslAturCurrOutputPwr OBJECT-TYPESYNTAXINTEGER(-310..310)UNITS"tenth dBm"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence."::={ adslAturPhysEntry 7}adslAturCurrAttainableRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate."::={ adslAturPhysEntry 8}adslAtucChanTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucChanEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 4}adslAtucChanEntry OBJECT-TYPESYNTAX AdslAtucChanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAtucChanTable."INDEX{ ifIndex }::={ adslAtucChanTable 1}
AdslAtucChanEntry ::=SEQUENCE{
adslAtucChanInterleaveDelay Gauge32,
adslAtucChanCurrTxRate Gauge32,
adslAtucChanPrevTxRate Gauge32,
adslAtucChanCrcBlockLength Gauge32}-- current group--adslAtucChanInterleaveDelay OBJECT-TYPESYNTAXGauge32UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Interleave Delay for this channel.
Interleave delay applies only to the
interleave channel and defines the mapping
(relative spacing) between subsequent input
bytes at the interleaver input and their placement
in the bit stream at the interleaver output.
Larger numbers provide greater separation between
consecutive input bytes in the output bit stream
allowing for improved impulse noise immunity at
the expense of payload latency.
In the case where the ifType is Fast(125), use
noSuchObject."::={ adslAtucChanEntry 1}adslAtucChanCurrTxRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Actual transmit rate on this channel."::={ adslAtucChanEntry 2}adslAtucChanPrevTxRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The rate at the time of the last
adslAtucRateChangeTrap event. It is also set at
initialization to prevent a trap being sent.
Rate changes less than adslAtucThresh(*)RateDown
or less than adslAtucThresh(*)RateUp will not
cause a trap or cause this object to change.
(*) == Fast or Interleave.
See AdslLineAlarmConfProfileEntry."::={ adslAtucChanEntry 3}adslAtucChanCrcBlockLength OBJECT-TYPESYNTAXGauge32UNITS"byte"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the length of the channel data-block
on which the CRC operates. Refer to Line Code
Specific MIBs, [11] and [12] for more
information."::={ adslAtucChanEntry 4}adslAturChanTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturChanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 5}adslAturChanEntry OBJECT-TYPESYNTAX AdslAturChanEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAturChanTable."INDEX{ ifIndex }::={ adslAturChanTable 1}
AdslAturChanEntry ::=SEQUENCE{
adslAturChanInterleaveDelay Gauge32,
adslAturChanCurrTxRate Gauge32,
adslAturChanPrevTxRate Gauge32,
adslAturChanCrcBlockLength Gauge32}-- current group--adslAturChanInterleaveDelay OBJECT-TYPESYNTAXGauge32UNITS"milli-seconds"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Interleave Delay for this channel.
Interleave delay applies only to the
interleave channel and defines the mapping
(relative spacing) between subsequent input
bytes at the interleaver input and their placement
in the bit stream at the interleaver output.
Larger numbers provide greater separation between
consecutive input bytes in the output bit stream
allowing for improved impulse noise immunity at
the expense of payload latency.
In the case where the ifType is Fast(125), use
noSuchObject."::={ adslAturChanEntry 1}adslAturChanCurrTxRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Actual transmit rate on this channel."::={ adslAturChanEntry 2}adslAturChanPrevTxRate OBJECT-TYPESYNTAXGauge32UNITS"bps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The rate at the time of the last
adslAturRateChangeTrap event. It is also set at
initialization to prevent a trap being sent.
Rate changes less than adslAturThresh(*)RateDown
or less than adslAturThresh(*)RateUp will not
cause a trap or cause this object to change.
(*) == Fast or Interleave.
See AdslLineAlarmConfProfileEntry."::={ adslAturChanEntry 3}adslAturChanCrcBlockLength OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the length of the channel data-block
on which the CRC operates. Refer to Line Code
Specific MIBs, [11] and [12] for more
information."::={ adslAturChanEntry 4}adslAtucPerfDataTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUC.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 6}adslAtucPerfDataEntry OBJECT-TYPESYNTAX AdslAtucPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in adslAtucPerfDataTable."INDEX{ ifIndex }::={ adslAtucPerfDataTable 1}
AdslAtucPerfDataEntry ::=SEQUENCE{
adslAtucPerfLofs Counter32,
adslAtucPerfLoss Counter32,
adslAtucPerfLols Counter32,
adslAtucPerfLprs Counter32,
adslAtucPerfESs Counter32,
adslAtucPerfInits Counter32,
adslAtucPerfValidIntervals INTEGER,
adslAtucPerfInvalidIntervals INTEGER,
adslAtucPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
adslAtucPerfCurr15MinLofs PerfCurrentCount,
adslAtucPerfCurr15MinLoss PerfCurrentCount,
adslAtucPerfCurr15MinLols PerfCurrentCount,
adslAtucPerfCurr15MinLprs PerfCurrentCount,
adslAtucPerfCurr15MinESs PerfCurrentCount,
adslAtucPerfCurr15MinInits PerfCurrentCount,
adslAtucPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
adslAtucPerfCurr1DayLofs AdslPerfCurrDayCount,
adslAtucPerfCurr1DayLoss AdslPerfCurrDayCount,
adslAtucPerfCurr1DayLols AdslPerfCurrDayCount,
adslAtucPerfCurr1DayLprs AdslPerfCurrDayCount,
adslAtucPerfCurr1DayESs AdslPerfCurrDayCount,
adslAtucPerfCurr1DayInits AdslPerfCurrDayCount,
adslAtucPerfPrev1DayMoniSecs INTEGER,
adslAtucPerfPrev1DayLofs AdslPerfPrevDayCount,
adslAtucPerfPrev1DayLoss AdslPerfPrevDayCount,
adslAtucPerfPrev1DayLols AdslPerfPrevDayCount,
adslAtucPerfPrev1DayLprs AdslPerfPrevDayCount,
adslAtucPerfPrev1DayESs AdslPerfPrevDayCount,
adslAtucPerfPrev1DayInits AdslPerfPrevDayCount}-- Event Counters---- Also see adslAtucIntervalTable for 15 minute interval-- elapsed counters.--adslAtucPerfLofs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Framing failures since
agent reset."::={ adslAtucPerfDataEntry 1}adslAtucPerfLoss OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Signal failures since
agent reset."::={ adslAtucPerfDataEntry 2}adslAtucPerfLols OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Link failures since
agent reset."::={ adslAtucPerfDataEntry 3}adslAtucPerfLprs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Power failures since
agent reset."::={ adslAtucPerfDataEntry 4}adslAtucPerfESs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Errored Seconds since agent
reset. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAtucPerfDataEntry 5}adslAtucPerfInits OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Count of the line initialization attempts since
agent reset. Includes both successful and failed
attempts."::={ adslAtucPerfDataEntry 6}-- general 15 min interval information--adslAtucPerfValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available."::={ adslAtucPerfDataEntry 7}adslAtucPerfInvalidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of intervals in the range from
0 to the value of adslAtucPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations)."::={ adslAtucPerfDataEntry 8}-- 15 min current performance group--adslAtucPerfCurr15MinTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..899)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total elapsed seconds in this interval."::={ adslAtucPerfDataEntry 9}adslAtucPerfCurr15MinLofs OBJECT-TYPE
SYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Framing."::={ adslAtucPerfDataEntry 10}adslAtucPerfCurr15MinLoss OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Signal."::={ adslAtucPerfDataEntry 11}adslAtucPerfCurr15MinLols OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Link."::={ adslAtucPerfDataEntry 12}adslAtucPerfCurr15MinLprs OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Power."::={ adslAtucPerfDataEntry 13}adslAtucPerfCurr15MinESs OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds in the current 15 minute
interval. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAtucPerfDataEntry 14}adslAtucPerfCurr15MinInits OBJECT-TYPESYNTAXPerfCurrentCount
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the line initialization attempts in the
current 15 minute interval. Includes both successful
and failed attempts."::={ adslAtucPerfDataEntry 15}-- 1-day current and previous performance group--adslAtucPerfCurr1DayTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..86399)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of seconds that have elapsed since the
beginning of the current 1-day interval."::={ adslAtucPerfDataEntry 16}adslAtucPerfCurr1DayLofs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss of
Framing during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed."::={ adslAtucPerfDataEntry 17}adslAtucPerfCurr1DayLoss OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss of
Signal during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed."::={ adslAtucPerfDataEntry 18}adslAtucPerfCurr1DayLols OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss of
Link during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed."::={ adslAtucPerfDataEntry 19}adslAtucPerfCurr1DayLprs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss of
Power during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed."::={ adslAtucPerfDataEntry 20}adslAtucPerfCurr1DayESs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds during the current day as
measured by adslAtucPerfCurr1DayTimeElapsed.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAtucPerfDataEntry 21}adslAtucPerfCurr1DayInits OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the line initialization attempts in the
day as measured by adslAtucPerfCurr1DayTimeElapsed.
Includes both successful and failed attempts."::={ adslAtucPerfDataEntry 22}adslAtucPerfPrev1DayMoniSecs OBJECT-TYPESYNTAXINTEGER(0..86400)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason."::={ adslAtucPerfDataEntry 23}adslAtucPerfPrev1DayLofs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Count of seconds in the interval when there was
Loss of Framing within the most recent previous
1-day period."::={ adslAtucPerfDataEntry 24}adslAtucPerfPrev1DayLoss OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Signal within the most recent previous
1-day period."::={ adslAtucPerfDataEntry 25}adslAtucPerfPrev1DayLols OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Link within the most recent previous
1-day period."::={ adslAtucPerfDataEntry 26}adslAtucPerfPrev1DayLprs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Power within the most recent previous
1-day period."::={ adslAtucPerfDataEntry 27}adslAtucPerfPrev1DayESs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds within the most recent
previous 1-day period. The errored second parameter is
a count of one-second intervals containing one or more
crc anomalies, or one or more los or sef defects."::={ adslAtucPerfDataEntry 28}adslAtucPerfPrev1DayInits OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Count of the line initialization attempts in the most
recent previous 1-day period. Includes both successful
and failed attempts."::={ adslAtucPerfDataEntry 29}adslAturPerfDataTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 7}adslAturPerfDataEntry OBJECT-TYPESYNTAX AdslAturPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in adslAturPerfDataTable."INDEX{ ifIndex }::={ adslAturPerfDataTable 1}
AdslAturPerfDataEntry ::=SEQUENCE{
adslAturPerfLofs Counter32,
adslAturPerfLoss Counter32,
adslAturPerfLprs Counter32,
adslAturPerfESs Counter32,
adslAturPerfValidIntervals INTEGER,
adslAturPerfInvalidIntervals INTEGER,
adslAturPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
adslAturPerfCurr15MinLofs PerfCurrentCount,
adslAturPerfCurr15MinLoss PerfCurrentCount,
adslAturPerfCurr15MinLprs PerfCurrentCount,
adslAturPerfCurr15MinESs PerfCurrentCount,
adslAturPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
adslAturPerfCurr1DayLofs AdslPerfCurrDayCount,
adslAturPerfCurr1DayLoss AdslPerfCurrDayCount,
adslAturPerfCurr1DayLprs AdslPerfCurrDayCount,
adslAturPerfCurr1DayESs AdslPerfCurrDayCount,
adslAturPerfPrev1DayMoniSecs INTEGER,
adslAturPerfPrev1DayLofs AdslPerfPrevDayCount,
adslAturPerfPrev1DayLoss AdslPerfPrevDayCount,
adslAturPerfPrev1DayLprs AdslPerfPrevDayCount,
adslAturPerfPrev1DayESs AdslPerfPrevDayCount}-- Event (Raw) Counters---- Also see adslAturIntervalTable for 15 minute interval-- elapsed counters.--adslAturPerfLofs OBJECT-TYPESYNTAXCounter32UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Framing failures since
agent reset."::={ adslAturPerfDataEntry 1}adslAturPerfLoss OBJECT-TYPESYNTAXCounter32UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Signal failures since
agent reset."::={ adslAturPerfDataEntry 2}adslAturPerfLprs OBJECT-TYPESYNTAXCounter32UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Loss of Power failures since
agent reset."::={ adslAturPerfDataEntry 3}adslAturPerfESs OBJECT-TYPESYNTAXCounter32UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of Errored Seconds since agent
reset. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAturPerfDataEntry 4}-- general 15 min interval information--adslAturPerfValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available."::={ adslAturPerfDataEntry 5}adslAturPerfInvalidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of intervals in the range from
0 to the value of adslAturPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations)."::={ adslAturPerfDataEntry 6}-- 15 min current performance group--adslAturPerfCurr15MinTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..899)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total elapsed seconds in this interval."::={ adslAturPerfDataEntry 7}adslAturPerfCurr15MinLofs OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Framing."::={ adslAturPerfDataEntry 8}adslAturPerfCurr15MinLoss OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Signal."::={ adslAturPerfDataEntry 9}adslAturPerfCurr15MinLprs OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the current 15 minute interval
when there was Loss of Power."::={ adslAturPerfDataEntry 10}adslAturPerfCurr15MinESs OBJECT-TYPESYNTAXPerfCurrentCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds in the current 15 minute
interval. The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAturPerfDataEntry 11}-- 1-day current and previous performance group--adslAturPerfCurr1DayTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..86399)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of seconds that have elapsed since the
beginning of the current 1-day interval."::={ adslAturPerfDataEntry 12}adslAturPerfCurr1DayLofs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss
of Framing during the current day as measured by
adslAturPerfCurr1DayTimeElapsed."::={ adslAturPerfDataEntry 13}adslAturPerfCurr1DayLoss OBJECT-TYPE
SYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss
of Signal during the current day as measured by
adslAturPerfCurr1DayTimeElapsed."::={ adslAturPerfDataEntry 14}adslAturPerfCurr1DayLprs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the number of seconds when there was Loss
of Power during the current day as measured by
adslAturPerfCurr1DayTimeElapsed."::={ adslAturPerfDataEntry 15}adslAturPerfCurr1DayESs OBJECT-TYPESYNTAXAdslPerfCurrDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds during the current day as
measured by adslAturPerfCurr1DayTimeElapsed.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAturPerfDataEntry 16}adslAturPerfPrev1DayMoniSecs OBJECT-TYPESYNTAXINTEGER(0..86400)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason."::={ adslAturPerfDataEntry 17}adslAturPerfPrev1DayLofs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Count of seconds in the interval when there was
Loss of Framing within the most recent previous
1-day period."::={ adslAturPerfDataEntry 18}adslAturPerfPrev1DayLoss OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Signal within the most recent previous
1-day period."::={ adslAturPerfDataEntry 19}adslAturPerfPrev1DayLprs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Power within the most recent previous
1-day period."::={ adslAturPerfDataEntry 20}adslAturPerfPrev1DayESs OBJECT-TYPESYNTAXAdslPerfPrevDayCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds within the most recent
previous 1-day period. The errored second parameter is
a count of one-second intervals containing one or more
crc anomalies, or one or more los or sef defects."::={ adslAturPerfDataEntry 21}adslAtucIntervalTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUC
performance data collection interval.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 8}adslAtucIntervalEntry OBJECT-TYPESYNTAX AdslAtucIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry in the adslAtucIntervalTable."INDEX{ ifIndex, adslAtucIntervalNumber }::={ adslAtucIntervalTable 1}
AdslAtucIntervalEntry ::=SEQUENCE{
adslAtucIntervalNumber INTEGER,
adslAtucIntervalLofs PerfIntervalCount,
adslAtucIntervalLoss PerfIntervalCount,
adslAtucIntervalLols PerfIntervalCount,
adslAtucIntervalLprs PerfIntervalCount,
adslAtucIntervalESs PerfIntervalCount,
adslAtucIntervalInits PerfIntervalCount,
adslAtucIntervalValidData TruthValue}adslAtucIntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional."::={ adslAtucIntervalEntry 1}adslAtucIntervalLofs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was Loss
of Framing."::={ adslAtucIntervalEntry 2}adslAtucIntervalLoss OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was Loss
of Signal."::={ adslAtucIntervalEntry 3}adslAtucIntervalLols OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was Loss
of Link."::={ adslAtucIntervalEntry 4}adslAtucIntervalLprs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was Loss
of Power."::={ adslAtucIntervalEntry 5}adslAtucIntervalESs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAtucIntervalEntry 6}adslAtucIntervalInits OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of the line initialization attempts
during the interval. Includes both successful
and failed attempts."::={ adslAtucIntervalEntry 7}adslAtucIntervalValidData OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This variable indicates if the data for this
interval is valid."::={ adslAtucIntervalEntry 8}adslAturIntervalTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR
performance data collection interval.
ADSL physical interfaces are those
ifEntries where ifType is equal to adsl(94)."::={ adslMibObjects 9}adslAturIntervalEntry OBJECT-TYPESYNTAX AdslAturIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAturIntervalTable."INDEX{ ifIndex, adslAturIntervalNumber }::={ adslAturIntervalTable 1}
AdslAturIntervalEntry ::=SEQUENCE{
adslAturIntervalNumber INTEGER,
adslAturIntervalLofs PerfIntervalCount,
adslAturIntervalLoss PerfIntervalCount,
adslAturIntervalLprs PerfIntervalCount,
adslAturIntervalESs PerfIntervalCount,
adslAturIntervalValidData TruthValue}adslAturIntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional."::={ adslAturIntervalEntry 1}adslAturIntervalLofs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Framing."::={ adslAturIntervalEntry 2}adslAturIntervalLoss OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Signal."::={ adslAturIntervalEntry 3}
adslAturIntervalLprs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of seconds in the interval when there was
Loss of Power."::={ adslAturIntervalEntry 4}adslAturIntervalESs OBJECT-TYPESYNTAXPerfIntervalCountUNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects."::={ adslAturIntervalEntry 5}adslAturIntervalValidData OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This variable indicates if the data for this
interval is valid."::={ adslAturIntervalEntry 6}adslAtucChanPerfDataTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucChanPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 10}adslAtucChanPerfDataEntry OBJECT-TYPESYNTAX AdslAtucChanPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in adslAtucChanPerfDataTable."INDEX{ ifIndex }::={ adslAtucChanPerfDataTable 1}
AdslAtucChanPerfDataEntry ::=SEQUENCE{
adslAtucChanReceivedBlks Counter32,
adslAtucChanTransmittedBlks Counter32,
adslAtucChanCorrectedBlks Counter32,
adslAtucChanUncorrectBlks Counter32,
adslAtucChanPerfValidIntervals INTEGER,
adslAtucChanPerfInvalidIntervals INTEGER,
adslAtucChanPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
adslAtucChanPerfCurr15MinReceivedBlks PerfCurrentCount,
adslAtucChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
adslAtucChanPerfCurr15MinCorrectedBlks PerfCurrentCount,
adslAtucChanPerfCurr15MinUncorrectBlks PerfCurrentCount,
adslAtucChanPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
adslAtucChanPerfCurr1DayReceivedBlks AdslPerfCurrDayCount,
adslAtucChanPerfCurr1DayTransmittedBlks AdslPerfCurrDayCount,
adslAtucChanPerfCurr1DayCorrectedBlks AdslPerfCurrDayCount,
adslAtucChanPerfCurr1DayUncorrectBlks AdslPerfCurrDayCount,
adslAtucChanPerfPrev1DayMoniSecs INTEGER,
adslAtucChanPerfPrev1DayReceivedBlks AdslPerfPrevDayCount,
adslAtucChanPerfPrev1DayTransmittedBlks AdslPerfPrevDayCount,
adslAtucChanPerfPrev1DayCorrectedBlks AdslPerfPrevDayCount,
adslAtucChanPerfPrev1DayUncorrectBlks AdslPerfPrevDayCount}-- performance group---- Note: block is intended to be the length of the channel-- data-block on which the CRC operates. See-- adslAtucChanCrcBlockLength for more information.--adslAtucChanReceivedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this channel
since agent reset."::={ adslAtucChanPerfDataEntry 1}adslAtucChanTransmittedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel since agent reset."::={ adslAtucChanPerfDataEntry 2}
adslAtucChanCorrectedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected since agent reset. These blocks are passed
on as good data."::={ adslAtucChanPerfDataEntry 3}adslAtucChanUncorrectBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors since agent reset."::={ adslAtucChanPerfDataEntry 4}-- general 15 min interval information--adslAtucChanPerfValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available."::={ adslAtucChanPerfDataEntry 5}adslAtucChanPerfInvalidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of intervals in the range from
0 to the value of adslAtucChanPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations)."::={ adslAtucChanPerfDataEntry 6}-- 15 min current performance group--adslAtucChanPerfCurr15MinTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..899)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total elapsed seconds in this interval."::={ adslAtucChanPerfDataEntry 7}adslAtucChanPerfCurr15MinReceivedBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this channel
within the current 15 minute interval."::={ adslAtucChanPerfDataEntry 8}adslAtucChanPerfCurr15MinTransmittedBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel within the current 15 minute interval."::={ adslAtucChanPerfDataEntry 9}adslAtucChanPerfCurr15MinCorrectedBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel within the current 15 minute
interval."::={ adslAtucChanPerfDataEntry 10}adslAtucChanPerfCurr15MinUncorrectBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel within the current 15 minute
interval."::={ adslAtucChanPerfDataEntry 11}-- 1-day current and previous performance group--adslAtucChanPerfCurr1DayTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..86399)
UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of seconds that have elapsed since the
beginning of the current 1-day interval."::={ adslAtucChanPerfDataEntry 12}adslAtucChanPerfCurr1DayReceivedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this
channel during the current day as measured by
adslAtucChanPerfCurr1DayTimeElapsed."::={ adslAtucChanPerfDataEntry 13}adslAtucChanPerfCurr1DayTransmittedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel during the current day as measured by
adslAtucChanPerfCurr1DayTimeElapsed."::={ adslAtucChanPerfDataEntry 14}adslAtucChanPerfCurr1DayCorrectedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel during the current day as
measured by adslAtucChanPerfCurr1DayTimeElapsed."::={ adslAtucChanPerfDataEntry 15}adslAtucChanPerfCurr1DayUncorrectBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel during the current day as
measured by adslAtucChanPerfCurr1DayTimeElapsed."::={ adslAtucChanPerfDataEntry 16}adslAtucChanPerfPrev1DayMoniSecs OBJECT-TYPESYNTAXINTEGER(0..86400)
UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason."::={ adslAtucChanPerfDataEntry 17}adslAtucChanPerfPrev1DayReceivedBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this
channel within the most recent previous 1-day
period."::={ adslAtucChanPerfDataEntry 18}adslAtucChanPerfPrev1DayTransmittedBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel within the most recent previous 1-day
period."::={ adslAtucChanPerfDataEntry 19}adslAtucChanPerfPrev1DayCorrectedBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel within the most recent
previous 1-day period."::={ adslAtucChanPerfDataEntry 20}adslAtucChanPerfPrev1DayUncorrectBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel within the most recent previous
1-day period."::={ adslAtucChanPerfDataEntry 21}adslAturChanPerfDataTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturChanPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 11}adslAturChanPerfDataEntry OBJECT-TYPESYNTAX AdslAturChanPerfDataEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in adslAturChanPerfDataTable."INDEX{ ifIndex }::={ adslAturChanPerfDataTable 1}
AdslAturChanPerfDataEntry ::=SEQUENCE{
adslAturChanReceivedBlks Counter32,
adslAturChanTransmittedBlks Counter32,
adslAturChanCorrectedBlks Counter32,
adslAturChanUncorrectBlks Counter32,
adslAturChanPerfValidIntervals INTEGER,
adslAturChanPerfInvalidIntervals INTEGER,
adslAturChanPerfCurr15MinTimeElapsed AdslPerfTimeElapsed,
adslAturChanPerfCurr15MinReceivedBlks PerfCurrentCount,
adslAturChanPerfCurr15MinTransmittedBlks PerfCurrentCount,
adslAturChanPerfCurr15MinCorrectedBlks PerfCurrentCount,
adslAturChanPerfCurr15MinUncorrectBlks PerfCurrentCount,
adslAturChanPerfCurr1DayTimeElapsed AdslPerfTimeElapsed,
adslAturChanPerfCurr1DayReceivedBlks AdslPerfCurrDayCount,
adslAturChanPerfCurr1DayTransmittedBlks AdslPerfCurrDayCount,
adslAturChanPerfCurr1DayCorrectedBlks AdslPerfCurrDayCount,
adslAturChanPerfCurr1DayUncorrectBlks AdslPerfCurrDayCount,
adslAturChanPerfPrev1DayMoniSecs INTEGER,
adslAturChanPerfPrev1DayReceivedBlks AdslPerfPrevDayCount,
adslAturChanPerfPrev1DayTransmittedBlks AdslPerfPrevDayCount,
adslAturChanPerfPrev1DayCorrectedBlks AdslPerfPrevDayCount,
adslAturChanPerfPrev1DayUncorrectBlks AdslPerfPrevDayCount}-- performance group---- Note: block is intended to be the length of the channel
-- data-block on which the CRC operates. See-- adslAturChanCrcBlockLength for more information.--adslAturChanReceivedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this channel
since agent reset."::={ adslAturChanPerfDataEntry 1}adslAturChanTransmittedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel since agent reset."::={ adslAturChanPerfDataEntry 2}adslAturChanCorrectedBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected since agent reset. These blocks are passed
on as good data."::={ adslAturChanPerfDataEntry 3}adslAturChanUncorrectBlks OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors since agent reset."::={ adslAturChanPerfDataEntry 4}-- general 15 min interval information--adslAturChanPerfValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available."::={ adslAturChanPerfDataEntry 5}adslAturChanPerfInvalidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of intervals in the range from
0 to the value of adslAturChanPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases where
the data for some intervals are not available
(e.g., in proxy situations)."::={ adslAturChanPerfDataEntry 6}-- 15 min current performance group--adslAturChanPerfCurr15MinTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..899)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Total elapsed seconds in this interval.
A full interval is 900 seconds."::={ adslAturChanPerfDataEntry 7}adslAturChanPerfCurr15MinReceivedBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this
channel within the current 15 minute interval."::={ adslAturChanPerfDataEntry 8}adslAturChanPerfCurr15MinTransmittedBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel within the current 15 minute interval."::={ adslAturChanPerfDataEntry 9}adslAturChanPerfCurr15MinCorrectedBlks OBJECT-TYPESYNTAXPerfCurrentCount
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel within the current 15 minute
interval."::={ adslAturChanPerfDataEntry 10}adslAturChanPerfCurr15MinUncorrectBlks OBJECT-TYPESYNTAXPerfCurrentCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel within the current 15 minute
interval."::={ adslAturChanPerfDataEntry 11}-- 1-day current and previous performance group--adslAturChanPerfCurr1DayTimeElapsed OBJECT-TYPESYNTAXAdslPerfTimeElapsed(0..86399)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of seconds that have elapsed since the
beginning of the current 1-day interval."::={ adslAturChanPerfDataEntry 12}adslAturChanPerfCurr1DayReceivedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this
channel during the current day as measured by
adslAturChanPerfCurr1DayTimeElapsed."::={ adslAturChanPerfDataEntry 13}adslAturChanPerfCurr1DayTransmittedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel during the current day as measured by
adslAturChanPerfCurr1DayTimeElapsed."::={ adslAturChanPerfDataEntry 14}adslAturChanPerfCurr1DayCorrectedBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCount
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel during the current day as
measured by adslAturChanPerfCurr1DayTimeElapsed."::={ adslAturChanPerfDataEntry 15}adslAturChanPerfCurr1DayUncorrectBlks OBJECT-TYPESYNTAXAdslPerfCurrDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel during the current day as
measured by adslAturChanPerfCurr1DayTimeElapsed."::={ adslAturChanPerfDataEntry 16}adslAturChanPerfPrev1DayMoniSecs OBJECT-TYPESYNTAXINTEGER(0..86400)UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of time in the previous 1-day interval
over which the performance monitoring information
is actually counted. This value will be the same as
the interval duration except in a situation where
performance monitoring data could not be collected
for any reason."::={ adslAturChanPerfDataEntry 17}adslAturChanPerfPrev1DayReceivedBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this
channel within the most recent previous 1-day
period."::={ adslAturChanPerfDataEntry 18}adslAturChanPerfPrev1DayTransmittedBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel within the most recent previous 1-day
period."::={ adslAturChanPerfDataEntry 19}adslAturChanPerfPrev1DayCorrectedBlks OBJECT-TYPE
SYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel within the most recent
previous 1-day period."::={ adslAturChanPerfDataEntry 20}adslAturChanPerfPrev1DayUncorrectBlks OBJECT-TYPESYNTAXAdslPerfPrevDayCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel within the most recent previous
1-day period."::={ adslAturChanPerfDataEntry 21}adslAtucChanIntervalTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAtucChanIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUC channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 12}adslAtucChanIntervalEntry OBJECT-TYPESYNTAX AdslAtucChanIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAtucIntervalTable."INDEX{ ifIndex, adslAtucChanIntervalNumber }::={ adslAtucChanIntervalTable 1}
AdslAtucChanIntervalEntry ::=SEQUENCE{
adslAtucChanIntervalNumber INTEGER,
adslAtucChanIntervalReceivedBlks PerfIntervalCount,
adslAtucChanIntervalTransmittedBlks PerfIntervalCount,
adslAtucChanIntervalCorrectedBlks PerfIntervalCount,
adslAtucChanIntervalUncorrectBlks PerfIntervalCount,
adslAtucChanIntervalValidData TruthValue}adslAtucChanIntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional."::={ adslAtucChanIntervalEntry 1}adslAtucChanIntervalReceivedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this channel
during this interval."::={ adslAtucChanIntervalEntry 2}adslAtucChanIntervalTransmittedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel during this interval."::={ adslAtucChanIntervalEntry 3}adslAtucChanIntervalCorrectedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel during this interval."::={ adslAtucChanIntervalEntry 4}adslAtucChanIntervalUncorrectBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel during this interval."::={ adslAtucChanIntervalEntry 5}adslAtucChanIntervalValidData OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This variable indicates if the data for this
interval is valid."::={ adslAtucChanIntervalEntry 6}
adslAturChanIntervalTable OBJECT-TYPESYNTAXSEQUENCEOF AdslAturChanIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides one row for each ATUR channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125)."::={ adslMibObjects 13}adslAturChanIntervalEntry OBJECT-TYPESYNTAX AdslAturChanIntervalEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the adslAturIntervalTable."INDEX{ ifIndex, adslAturChanIntervalNumber }::={ adslAturChanIntervalTable 1}
AdslAturChanIntervalEntry ::=SEQUENCE{
adslAturChanIntervalNumber INTEGER,
adslAturChanIntervalReceivedBlks PerfIntervalCount,
adslAturChanIntervalTransmittedBlks PerfIntervalCount,
adslAturChanIntervalCorrectedBlks PerfIntervalCount,
adslAturChanIntervalUncorrectBlks PerfIntervalCount,
adslAturChanIntervalValidData TruthValue}adslAturChanIntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional."::={ adslAturChanIntervalEntry 1}adslAturChanIntervalReceivedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks received on this channel
during this interval."::={ adslAturChanIntervalEntry 2}
adslAturChanIntervalTransmittedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all encoded blocks transmitted on this
channel during this interval."::={ adslAturChanIntervalEntry 3}adslAturChanIntervalCorrectedBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with errors that were
corrected on this channel during this interval."::={ adslAturChanIntervalEntry 4}adslAturChanIntervalUncorrectBlks OBJECT-TYPESYNTAXPerfIntervalCountMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Count of all blocks received with uncorrectable
errors on this channel during this interval."::={ adslAturChanIntervalEntry 5}adslAturChanIntervalValidData OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This variable indicates if the data for this
interval is valid."::={ adslAturChanIntervalEntry 6}-- Profile Group--adslLineConfProfileTable OBJECT-TYPESYNTAXSEQUENCEOF AdslLineConfProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains information on the ADSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the ADSL line."::={ adslMibObjects 14}adslLineConfProfileEntry OBJECT-TYPESYNTAX AdslLineConfProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"Each entry consists of a list of parameters that
represents the configuration of an ADSL modem.
When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set to `DEFVAL' and its parameters will be set
to vendor specific values, unless otherwise specified
in this document.
When `static' profiles are implemented, profiles
are automaticly created or destroyed as ADSL
physical lines are discovered and removed by
the system. The name of the profile will be
equivalent to the decimal value of the line's
interface index.
"INDEX{IMPLIED adslLineConfProfileName}::={ adslLineConfProfileTable 1}
AdslLineConfProfileEntry ::=SEQUENCE{
adslLineConfProfileName SnmpAdminString,
adslAtucConfRateMode INTEGER,
adslAtucConfRateChanRatio INTEGER,
adslAtucConfTargetSnrMgn INTEGER,
adslAtucConfMaxSnrMgn INTEGER,
adslAtucConfMinSnrMgn INTEGER,
adslAtucConfDownshiftSnrMgn INTEGER,
adslAtucConfUpshiftSnrMgn INTEGER,
adslAtucConfMinUpshiftTime INTEGER,
adslAtucConfMinDownshiftTime INTEGER,
adslAtucChanConfFastMinTxRate Unsigned32,
adslAtucChanConfInterleaveMinTxRate Unsigned32,
adslAtucChanConfFastMaxTxRate Unsigned32,
adslAtucChanConfInterleaveMaxTxRate Unsigned32,
adslAtucChanConfMaxInterleaveDelay INTEGER,
adslAturConfRateMode INTEGER,
adslAturConfRateChanRatio INTEGER,
adslAturConfTargetSnrMgn INTEGER,
adslAturConfMaxSnrMgn INTEGER,
adslAturConfMinSnrMgn INTEGER,
adslAturConfDownshiftSnrMgn INTEGER,
adslAturConfUpshiftSnrMgn INTEGER,
adslAturConfMinUpshiftTime INTEGER,
adslAturConfMinDownshiftTime INTEGER,
adslAturChanConfFastMinTxRate Unsigned32,
adslAturChanConfInterleaveMinTxRate Unsigned32,
adslAturChanConfFastMaxTxRate Unsigned32,
adslAturChanConfInterleaveMaxTxRate Unsigned32,
adslAturChanConfMaxInterleaveDelay INTEGER,
adslLineConfProfileRowStatus RowStatus}adslLineConfProfileName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
provide a default profile whose name is `DEFVAL'.
When `static' profiles are implemented, there is an
one-to-one relationship between each line and its
profile. In which case, the profile name will
need to algorithmicly represent the Line's ifIndex.
Therefore, the profile's name is a decimalized string
of the ifIndex that is fixed-length (i.e., 10) with
leading zero(s). For example, the profile name for
ifIndex which equals '15' will be '0000000015'."::={ adslLineConfProfileEntry 1}adslAtucConfRateMode OBJECT-TYPESYNTAXINTEGER{fixed (1),-- no rate adaptationadaptAtStartup (2),-- perform rate adaptation-- only at initializationadaptAtRuntime (3)-- perform rate adaptation at-- any time}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information."::={ adslLineConfProfileEntry 2}adslAtucConfRateChanRatio OBJECT-TYPESYNTAXINTEGER(0..100)UNITS"%"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth on each channel in excess of the
corresponding ChanConfMinTxRate so that:
adslAtucConfRateChanRatio =
[Fast / (Fast + Interleaved)] * 100
In other words this value is the fast channel
percentage."::={ adslLineConfProfileEntry 3}adslAtucConfTargetSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization."::={ adslLineConfProfileEntry 4}adslAtucConfMaxSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation."::={ adslLineConfProfileEntry 5}adslAtucConfMinSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down."::={ adslLineConfProfileEntry 6}adslAtucConfDownshiftSnrMgn OBJECT-TYPE
SYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode is not present,
the value will be `0'."::={ adslLineConfProfileEntry 7}adslAtucConfUpshiftSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is not present, the value will
be `0'."::={ adslLineConfProfileEntry 8}adslAtucConfMinUpshiftTime OBJECT-TYPESYNTAXINTEGER(0..16383)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'."::={ adslLineConfProfileEntry 9}adslAtucConfMinDownshiftTime OBJECT-TYPESYNTAXINTEGER(0..16383)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'."::={ adslLineConfProfileEntry 10}
adslAtucChanConfFastMinTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for
ATUC receive rates."::={ adslLineConfProfileEntry 11}adslAtucChanConfInterleaveMinTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and see
ATUR transmit rate for receive rates."::={ adslLineConfProfileEntry 12}adslAtucChanConfFastMaxTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and see ATUR transmit rate for
ATUC receive rates."::={ adslLineConfProfileEntry 13}adslAtucChanConfInterleaveMaxTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and ATUR transmit
rate for ATUC receive rates."::={ adslLineConfProfileEntry 14}adslAtucChanConfMaxInterleaveDelay OBJECT-TYPESYNTAXINTEGER(0..255)UNITS"milli-seconds"MAX-ACCESSread-createSTATUScurrent
DESCRIPTION"Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
subsequent input bytes at the interleaver input and
their placement in the bit stream at the interleaver
output. Larger numbers provide greater separation
between consecutive input bytes in the output bit
stream allowing for improved impulse noise immunity
at the expense of payload latency."::={ adslLineConfProfileEntry 15}adslAturConfRateMode OBJECT-TYPESYNTAXINTEGER{fixed (1),-- no rate adaptationadaptAtStartup (2),-- perform rate adaptation-- only at initializationadaptAtRuntime (3)-- perform rate adaptation at-- any time}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information."::={ adslLineConfProfileEntry 16}adslAturConfRateChanRatio OBJECT-TYPESYNTAXINTEGER(0..100)UNITS"%"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth on each channel in excess of the
corresponding ChanConfMinTxRate so that:
adslAturConfRateChanRatio =
[Fast / (Fast + Interleaved)] * 100
In other words this value is the fast channel
percentage."::={ adslLineConfProfileEntry 17}adslAturConfTargetSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization."::={ adslLineConfProfileEntry 18}adslAturConfMaxSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation."::={ adslLineConfProfileEntry 19}adslAturConfMinSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or shut down."::={ adslLineConfProfileEntry 20}adslAturConfDownshiftSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode is not present,
the value will be `0'."::={ adslLineConfProfileEntry 21}adslAturConfUpshiftSnrMgn OBJECT-TYPESYNTAXINTEGER(0..310)UNITS"tenth dB"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not present,
the value will be `0'."::={ adslLineConfProfileEntry 22}adslAturConfMinUpshiftTime OBJECT-TYPESYNTAXINTEGER(0..16383)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'."::={ adslLineConfProfileEntry 23}adslAturConfMinDownshiftTime OBJECT-TYPESYNTAXINTEGER(0..16383)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'."::={ adslLineConfProfileEntry 24}adslAturChanConfFastMinTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates."::={ adslLineConfProfileEntry 25}adslAturChanConfInterleaveMinTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION
"Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and ATUC transmit rate
for ATUR receive rates."::={ adslLineConfProfileEntry 26}adslAturChanConfFastMaxTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates."::={ adslLineConfProfileEntry 27}adslAturChanConfInterleaveMaxTxRate OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and see
ATUC transmit rate for ATUR receive rates."::={ adslLineConfProfileEntry 28}adslAturChanConfMaxInterleaveDelay OBJECT-TYPESYNTAXINTEGER(0..255)UNITS"milli-seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
subsequent input bytes at the interleaver input and
their placement in the bit stream at the interleaver
output. Larger numbers provide greater separation
between consecutive input bytes in the output bit
stream allowing for improved impulse noise immunity
at the expense of payload latency."::={ adslLineConfProfileEntry 29}adslLineConfProfileRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'."::={ adslLineConfProfileEntry 30}adslLineAlarmConfProfileTable OBJECT-TYPESYNTAXSEQUENCEOF AdslLineAlarmConfProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains information on the ADSL line
configuration. One entry in this table reflects a
profile defined by a manager which can be used to
configure the modem for a physical line"::={ adslMibObjects 15}adslLineAlarmConfProfileEntry OBJECT-TYPESYNTAX AdslLineAlarmConfProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry consists of a list of parameters that
represents the configuration of an ADSL modem.
When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set to `DEFVAL' and its parameters will be set to
vendor specific values, unless otherwise specified
in this document.
When `static' profiles are implemented, profiles
are automaticly created or destroyed as ADSL
physical lines are discovered and removed by
the system. The name of the profile will be
equivalent to the decimal value of the line's
interface index.
"INDEX{IMPLIED adslLineAlarmConfProfileName}::={ adslLineAlarmConfProfileTable 1}
AdslLineAlarmConfProfileEntry ::=SEQUENCE{
adslLineAlarmConfProfileName SnmpAdminString,
adslAtucThresh15MinLofs INTEGER,
adslAtucThresh15MinLoss INTEGER,
adslAtucThresh15MinLols INTEGER,
adslAtucThresh15MinLprs INTEGER,
adslAtucThresh15MinESs INTEGER,
adslAtucThreshFastRateUp Unsigned32,
adslAtucThreshInterleaveRateUp Unsigned32,
adslAtucThreshFastRateDown Unsigned32,
adslAtucThreshInterleaveRateDown Unsigned32,
adslAtucInitFailureTrapEnable INTEGER,
adslAturThresh15MinLofs INTEGER,
adslAturThresh15MinLoss INTEGER,
adslAturThresh15MinLprs INTEGER,
adslAturThresh15MinESs INTEGER,
adslAturThreshFastRateUp Unsigned32,
adslAturThreshInterleaveRateUp Unsigned32,
adslAturThreshFastRateDown Unsigned32,
adslAturThreshInterleaveRateDown Unsigned32,
adslLineAlarmConfProfileRowStatus RowStatus}adslLineAlarmConfProfileName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..32))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object is used by the line alarm configuration
table in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
provide a default profile whose name is `DEFVAL'.
When `static' profiles are implemented, there is an
one-to-one relationship between each line and its
profile. In which case, the profile name will
need to algorithmicly represent the Line's ifIndex.
Therefore, the profile's name is a decimalized string
of the ifIndex that is fixed-length (i.e., 10) with
leading zero(s). For example, the profile name for
ifIndex which equals '15' will be '0000000015'."::={ adslLineAlarmConfProfileEntry 1}adslAtucThresh15MinLofs OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Frame Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLofsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 2}adslAtucThresh15MinLoss OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Signal Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLossThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 3}adslAtucThresh15MinLols OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Link Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLolsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 4}adslAtucThresh15MinLprs OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Power Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLprsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 5}adslAtucThresh15MinESs OBJECT-TYPESYNTAXINTEGER(0..900)
UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Errored Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfESsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 6}adslAtucThreshFastRateUp OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 7}adslAtucThreshInterleaveRateUp OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Interleave' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 8}adslAtucThreshFastRateDown OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 9}adslAtucThreshInterleaveRateDown OBJECT-TYPESYNTAXUnsigned32UNITS"bps"
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Interleave' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 10}adslAtucInitFailureTrapEnable OBJECT-TYPESYNTAXINTEGER{enable (1),disable (2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Enables and disables the InitFailureTrap. This
object is defaulted disable(2)."DEFVAL{ disable }::={ adslLineAlarmConfProfileEntry 11}adslAturThresh15MinLofs OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Frame Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAturPerfLofsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 12}adslAturThresh15MinLoss OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Signal Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAturPerfLossThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 13}
adslAturThresh15MinLprs OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Loss of Power Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAturPerfLprsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 14}adslAturThresh15MinESs OBJECT-TYPESYNTAXINTEGER(0..900)UNITS"seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The number of Errored Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAturPerfESsThreshTrap.
One trap will be sent per interval per interface.
A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 15}adslAturThreshFastRateUp OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 16}adslAturThreshInterleaveRateUp OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Interleave' channels only.
configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 17}adslAturThreshFastRateDown OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 18}adslAturThreshInterleaveRateDown OBJECT-TYPESYNTAXUnsigned32UNITS"bps"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Applies to `Interleave' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the trap."::={ adslLineAlarmConfProfileEntry 19}adslLineAlarmConfProfileRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profile.
Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced
from all associated lines.
If the implementator of this MIB has chosen not
to implement `dynamic assignment' of profiles, this
object's MIN-ACCESS is read-only and its value
is always to be `active'."::={ adslLineAlarmConfProfileEntry 20}-- Line Code Specific Tables-- These are place holders for the Line Code Specific MIBs-- once they become available.adslLCSMib OBJECTIDENTIFIER::={ adslMibObjects 16}
-- trap definitionsadslTraps OBJECTIDENTIFIER::={ adslLineMib 2}adslAtucTraps OBJECTIDENTIFIER::={ adslTraps 1}adslAtucPerfLofsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAtucPerfCurr15MinLofs,
adslAtucThresh15MinLofs }STATUScurrentDESCRIPTION"Loss of Framing 15-minute interval threshold reached."::={ adslAtucTraps 01}adslAtucPerfLossThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAtucPerfCurr15MinLoss,
adslAtucThresh15MinLoss }STATUScurrentDESCRIPTION"Loss of Signal 15-minute interval threshold reached."::={ adslAtucTraps 02}adslAtucPerfLprsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAtucPerfCurr15MinLprs,
adslAtucThresh15MinLprs }STATUScurrentDESCRIPTION"Loss of Power 15-minute interval threshold reached."::={ adslAtucTraps 03}adslAtucPerfESsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAtucPerfCurr15MinESs,
adslAtucThresh15MinESs }STATUScurrentDESCRIPTION"Errored Second 15-minute interval threshold reached."::={ adslAtucTraps 04}adslAtucRateChangeTrap NOTIFICATION-TYPEOBJECTS{ adslAtucChanCurrTxRate,
adslAtucChanPrevTxRate }STATUScurrentDESCRIPTION"The ATUCs transmit rate has changed (RADSL mode only)"::={ adslAtucTraps 05}adslAtucPerfLolsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAtucPerfCurr15MinLols,
adslAtucThresh15MinLols }STATUScurrentDESCRIPTION"Loss of Link 15-minute interval threshold reached."::={ adslAtucTraps 06}adslAtucInitFailureTrap NOTIFICATION-TYPEOBJECTS{ adslAtucCurrStatus }STATUScurrentDESCRIPTION"ATUC initialization failed. See adslAtucCurrStatus
for potential reasons."::={ adslAtucTraps 07}adslAturTraps OBJECTIDENTIFIER::={ adslTraps 2}adslAturPerfLofsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAturPerfCurr15MinLofs,
adslAturThresh15MinLofs }STATUScurrentDESCRIPTION"Loss of Framing 15-minute interval threshold reached."::={ adslAturTraps 01}adslAturPerfLossThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAturPerfCurr15MinLoss,
adslAturThresh15MinLoss }STATUScurrentDESCRIPTION"Loss of Signal 15-minute interval threshold reached."::={ adslAturTraps 02}adslAturPerfLprsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAturPerfCurr15MinLprs,
adslAturThresh15MinLprs }STATUScurrentDESCRIPTION"Loss of Power 15-minute interval threshold reached."::={ adslAturTraps 03}adslAturPerfESsThreshTrap NOTIFICATION-TYPEOBJECTS{ adslAturPerfCurr15MinESs,
adslAturThresh15MinESs }STATUScurrentDESCRIPTION"Errored Second 15-minute interval threshold reached."::={ adslAturTraps 04}adslAturRateChangeTrap NOTIFICATION-TYPE
OBJECTS{ adslAturChanCurrTxRate,
adslAturChanPrevTxRate }STATUScurrentDESCRIPTION"The ATURs transmit rate has changed (RADSL mode only)"::={ adslAturTraps 05}-- no adslAturPerfLolsThreshTrap possible { 0 6 }-- no adslAturInitFailureTrap possible { 0 7 }-- conformance informationadslConformance OBJECTIDENTIFIER::={ adslLineMib 3}adslGroups OBJECTIDENTIFIER::={ adslConformance 1}adslCompliances OBJECTIDENTIFIER::={ adslConformance 2}-- ATU-C agent compliance statementsadslLineMibAtucCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMP entities
which manage ADSL ATU-C interfaces."MODULE-- this moduleMANDATORY-GROUPS{
adslLineGroup, adslPhysicalGroup, adslChannelGroup,
adslAtucPhysPerfIntervalGroup,
adslAturPhysPerfIntervalGroup, adslLineConfProfileGroup,
adslLineAlarmConfProfileGroup,
adslLineConfProfileControlGroup
}GROUP adslAtucPhysPerfRawCounterGroup
DESCRIPTION"This group is optional. Implementations which
require continuous ATU-C physical event counters
should implement this group."GROUP adslAturPhysPerfRawCounterGroup
DESCRIPTION"This group is optional. Implementations which
require continuous ATU-R physical event counters
should implement this group."GROUP adslAtucChanPerformanceGroup
DESCRIPTION"This group is optional. Implementations which
require ATU-C channel block event counters should
implement this group."GROUP adslAturChanPerformanceGroup
DESCRIPTION"This group is optional. Implementations which
require ATU-R channel block event counters should
implement this group."OBJECT adslLineConfProfile
MIN-ACCESSread-only
DESCRIPTION"Read-only access is applicable when static
profiles are implemented."OBJECT adslAtucConfRateMode
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfRateChanRatio
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfTargetSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfMaxSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfMinSnrMgn
--PSIM MIN-ACCESS read-wrMIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfDownshiftSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfUpshiftSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfMinUpshiftTime
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucConfMinDownshiftTime
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucChanConfFastMinTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucChanConfInterleaveMinTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."
OBJECT adslAtucChanConfFastMaxTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucChanConfInterleaveMaxTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucChanConfMaxInterleaveDelay
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfRateMode
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfRateChanRatio
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfTargetSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfMaxSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfMinSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfDownshiftSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfUpshiftSnrMgn
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfMinUpshiftTime
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturConfMinDownshiftTime
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturChanConfFastMinTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturChanConfInterleaveMinTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturChanConfFastMaxTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturChanConfInterleaveMaxTxRate
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturChanConfMaxInterleaveDelay
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslLineConfProfileRowStatus
MIN-ACCESSread-onlyDESCRIPTION"Read-only access is applicable only when static
profiles are implemented."OBJECT adslLineAlarmConfProfile
MIN-ACCESSread-onlyDESCRIPTION"Read-only access is applicable only when static
profiles are implemented."OBJECT adslAtucThresh15MinLofs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinLoss
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinLols
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinLprs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinESs
MIN-ACCESSread-writeDESCRIPTION
"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshFastRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshInterleaveRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshFastRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshInterleaveRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucInitFailureTrapEnable
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLofs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLoss
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLprs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinESs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshFastRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshInterleaveRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshFastRateDown
MIN-ACCESSread-write
DESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshInterleaveRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslLineAlarmConfProfileRowStatus
MIN-ACCESSread-onlyDESCRIPTION"Read-only access is applicable only when static
profiles are implemented."::={ adslCompliances 1}-- ATU-R agent compliance statementsadslLineMibAturCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMP entities
which manage ADSL ATU-R interfaces."MODULE-- this moduleMANDATORY-GROUPS{
adslAturLineGroup, adslAturPhysicalGroup,
adslAturChannelGroup,
adslAturAtucPhysPerfIntervalGroup,
adslAturAturPhysPerfIntervalGroup,
adslAturLineAlarmConfProfileGroup,
adslAturLineConfProfileControlGroup
}GROUP adslAturAtucPhysPerfRawCounterGroup
DESCRIPTION"This group is optional. Implementations which
require continuous ATU-C physical event counters
should implement this group."GROUP adslAturAturPhysPerfRawCounterGroup
DESCRIPTION"This group is optional. Implementations which
require continuous ATU-R physical event counters
should implement this group."GROUP adslAturAtucChanPerformanceGroup
DESCRIPTION"This group is optional. Implementations which
require ATU-C channel block event counters should
implement this group."GROUP adslAturAturChanPerformanceGroup
DESCRIPTION"This group is optional. Implementations which
require ATU-R channel block event counters should
implement this group."OBJECT adslLineAlarmConfProfile
MIN-ACCESSread-onlyDESCRIPTION"Read-only access is applicable only when static
profiles are implemented."OBJECT adslAtucThresh15MinLofs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinLoss
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThresh15MinESs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshFastRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshInterleaveRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucThreshFastRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAtucInitFailureTrapEnable
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLofs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLoss
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinLprs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThresh15MinESs
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshFastRateUp
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshInterleaveRateUp
MIN-ACCESSread-writeDESCRIPTION
"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshFastRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslAturThreshInterleaveRateDown
MIN-ACCESSread-writeDESCRIPTION"Read-write access is applicable when
static profiles are implemented."OBJECT adslLineAlarmConfProfileRowStatus
MIN-ACCESSread-onlyDESCRIPTION"Read-only access is applicable only when static
profiles are implemented."OBJECT adslAtucCurrStatus
SYNTAXBITS{
noDefect(0),
lossOfFraming(1),
lossOfSignal(2)}DESCRIPTION"It is allowable to implement only noDefect(0),
lossOfFraming(1) and lossOfSignal(2) by the ATU-R
agent."::={ adslCompliances 2}-- units of conformanceadslLineGroup OBJECT-GROUPOBJECTS{
adslLineCoding, adslLineType, adslLineSpecific
}STATUScurrentDESCRIPTION"A collection of objects providing configuration
information about an ADSL Line."::={ adslGroups 1}adslPhysicalGroup OBJECT-GROUPOBJECTS{
adslAtucInvSerialNumber, adslAtucInvVendorID,
adslAtucInvVersionNumber, adslAtucCurrSnrMgn,
adslAtucCurrAtn, adslAtucCurrStatus,
adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
adslAturInvSerialNumber, adslAturInvVendorID,
adslAturInvVersionNumber, adslAturCurrSnrMgn,
adslAturCurrAtn, adslAturCurrStatus,
adslAturCurrOutputPwr, adslAturCurrAttainableRate
}STATUScurrentDESCRIPTION
"A collection of objects providing physical
configuration information of the ADSL Line."::={ adslGroups 2}adslChannelGroup OBJECT-GROUPOBJECTS{
adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
adslAtucChanPrevTxRate, adslAtucChanCrcBlockLength,
adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
adslAturChanPrevTxRate, adslAturChanCrcBlockLength
}STATUScurrentDESCRIPTION"A collection of objects providing configuration
information about an ADSL channel."::={ adslGroups 3}adslAtucPhysPerfRawCounterGroup OBJECT-GROUPOBJECTS{
adslAtucPerfLofs, adslAtucPerfLoss,
adslAtucPerfLols, adslAtucPerfLprs,
adslAtucPerfESs, adslAtucPerfInits
}STATUScurrentDESCRIPTION"A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end)."::={ adslGroups 4}adslAtucPhysPerfIntervalGroup OBJECT-GROUPOBJECTS{
adslAtucPerfValidIntervals,
adslAtucPerfInvalidIntervals,
adslAtucPerfCurr15MinTimeElapsed,
adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
adslAtucPerfCurr15MinLols, adslAtucPerfCurr15MinLprs,
adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
adslAtucPerfCurr1DayLols, adslAtucPerfCurr1DayLprs,
adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
adslAtucPerfPrev1DayMoniSecs,
adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
adslAtucPerfPrev1DayLols, adslAtucPerfPrev1DayLprs,
adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
adslAtucIntervalLofs, adslAtucIntervalLoss,
adslAtucIntervalLols, adslAtucIntervalLprs,
adslAtucIntervalESs, adslAtucIntervalInits,
adslAtucIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing current 15-minute,
1-day; and previous 1-day performance counts on
ADSL Line (ATU-C end) ."::={ adslGroups 5}adslAturPhysPerfRawCounterGroup OBJECT-GROUPOBJECTS{
adslAturPerfLofs, adslAturPerfLoss,
adslAturPerfLprs, adslAturPerfESs
}STATUScurrentDESCRIPTION"A collection of objects providing raw performance
counts on an ADSL Line (ATU-R end)."::={ adslGroups 6}adslAturPhysPerfIntervalGroup OBJECT-GROUPOBJECTS{
adslAturPerfValidIntervals,
adslAturPerfInvalidIntervals,
adslAturPerfCurr15MinTimeElapsed,
adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
adslAturPerfCurr1DayTimeElapsed,
adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
adslAturPerfPrev1DayMoniSecs,
adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
adslAturIntervalLofs,
adslAturIntervalLoss, adslAturIntervalLprs,
adslAturIntervalESs, adslAturIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing current 15-minute,
1-day; and previous 1-day performance counts on
ADSL Line (ATU-R end)."::={ adslGroups 7}adslAtucChanPerformanceGroup OBJECT-GROUPOBJECTS{
adslAtucChanReceivedBlks,
adslAtucChanTransmittedBlks,
adslAtucChanCorrectedBlks,
adslAtucChanUncorrectBlks,
adslAtucChanPerfValidIntervals,
adslAtucChanPerfInvalidIntervals,
adslAtucChanPerfCurr15MinTimeElapsed,
adslAtucChanPerfCurr15MinReceivedBlks,
adslAtucChanPerfCurr15MinTransmittedBlks,
adslAtucChanPerfCurr15MinCorrectedBlks,
adslAtucChanPerfCurr15MinUncorrectBlks,
adslAtucChanPerfCurr1DayTimeElapsed,
adslAtucChanPerfCurr1DayReceivedBlks,
adslAtucChanPerfCurr1DayTransmittedBlks,
adslAtucChanPerfCurr1DayCorrectedBlks,
adslAtucChanPerfCurr1DayUncorrectBlks,
adslAtucChanPerfPrev1DayMoniSecs,
adslAtucChanPerfPrev1DayReceivedBlks,
adslAtucChanPerfPrev1DayTransmittedBlks,
adslAtucChanPerfPrev1DayCorrectedBlks,
adslAtucChanPerfPrev1DayUncorrectBlks,
adslAtucChanIntervalReceivedBlks,
adslAtucChanIntervalTransmittedBlks,
adslAtucChanIntervalCorrectedBlks,
adslAtucChanIntervalUncorrectBlks,
adslAtucChanIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end)."::={ adslGroups 8}adslAturChanPerformanceGroup OBJECT-GROUPOBJECTS{
adslAturChanReceivedBlks,
adslAturChanTransmittedBlks,
adslAturChanCorrectedBlks,
adslAturChanUncorrectBlks,
adslAturChanPerfValidIntervals,
adslAturChanPerfInvalidIntervals,
adslAturChanPerfCurr15MinTimeElapsed,
adslAturChanPerfCurr15MinReceivedBlks,
adslAturChanPerfCurr15MinTransmittedBlks,
adslAturChanPerfCurr15MinCorrectedBlks,
adslAturChanPerfCurr15MinUncorrectBlks,
adslAturChanPerfCurr1DayTimeElapsed,
adslAturChanPerfCurr1DayReceivedBlks,
adslAturChanPerfCurr1DayTransmittedBlks,
adslAturChanPerfCurr1DayCorrectedBlks,
adslAturChanPerfCurr1DayUncorrectBlks,
adslAturChanPerfPrev1DayMoniSecs,
adslAturChanPerfPrev1DayReceivedBlks,
adslAturChanPerfPrev1DayTransmittedBlks,
adslAturChanPerfPrev1DayCorrectedBlks,
adslAturChanPerfPrev1DayUncorrectBlks,
adslAturChanIntervalReceivedBlks,
adslAturChanIntervalTransmittedBlks,
adslAturChanIntervalCorrectedBlks,
adslAturChanIntervalUncorrectBlks,
adslAturChanIntervalValidData
}STATUScurrent
DESCRIPTION"A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end)."::={ adslGroups 9}adslLineConfProfileGroup OBJECT-GROUPOBJECTS{
adslAtucConfRateMode, adslAtucConfRateChanRatio,
adslAtucConfTargetSnrMgn, adslAtucConfMaxSnrMgn,
adslAtucConfMinSnrMgn,
adslAtucConfDownshiftSnrMgn,
adslAtucConfUpshiftSnrMgn,
adslAtucConfMinUpshiftTime,
adslAtucConfMinDownshiftTime,
adslAtucChanConfFastMinTxRate,
adslAtucChanConfInterleaveMinTxRate,
adslAtucChanConfFastMaxTxRate,
adslAtucChanConfInterleaveMaxTxRate,
adslAtucChanConfMaxInterleaveDelay,
adslAturConfRateMode, adslAturConfRateChanRatio,
adslAturConfTargetSnrMgn, adslAturConfMaxSnrMgn,
adslAturConfMinSnrMgn, adslAturConfDownshiftSnrMgn,
adslAturConfUpshiftSnrMgn,
adslAturConfMinUpshiftTime,
adslAturConfMinDownshiftTime,
adslAturChanConfFastMinTxRate,
adslAturChanConfInterleaveMinTxRate,
adslAturChanConfFastMaxTxRate,
adslAturChanConfInterleaveMaxTxRate,
adslAturChanConfMaxInterleaveDelay
}STATUScurrentDESCRIPTION"A collection of objects providing provisioning
information about an ADSL Line."::={ adslGroups 10}adslLineAlarmConfProfileGroup OBJECT-GROUPOBJECTS{
adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
adslAtucThresh15MinLols, adslAtucThresh15MinLprs,
adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
adslAtucThreshInterleaveRateUp,
adslAtucThreshFastRateDown,
adslAtucThreshInterleaveRateDown,
adslAtucInitFailureTrapEnable,
adslAturThresh15MinLofs, adslAturThresh15MinLoss,
adslAturThresh15MinLprs, adslAturThresh15MinESs,
adslAturThreshFastRateUp,
adslAturThreshInterleaveRateUp,
adslAturThreshFastRateDown,
adslAturThreshInterleaveRateDown
}STATUScurrentDESCRIPTION"A collection of objects providing alarm provisioning
information about an ADSL Line."::={ adslGroups 11}adslLineConfProfileControlGroup OBJECT-GROUPOBJECTS{
adslLineConfProfile, adslLineAlarmConfProfile,
adslLineConfProfileRowStatus,
adslLineAlarmConfProfileRowStatus
}STATUScurrentDESCRIPTION"A collection of objects providing profile
control for the ADSL system."::={ adslGroups 12}adslNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{
adslAtucPerfLofsThreshTrap,
adslAtucPerfLossThreshTrap,
adslAtucPerfLprsThreshTrap,
adslAtucPerfESsThreshTrap,
adslAtucRateChangeTrap,
adslAtucPerfLolsThreshTrap,
adslAtucInitFailureTrap,
adslAturPerfLofsThreshTrap,
adslAturPerfLossThreshTrap,
adslAturPerfLprsThreshTrap,
adslAturPerfESsThreshTrap,
adslAturRateChangeTrap
}STATUScurrentDESCRIPTION"The collection of adsl notifications."::={ adslGroups 13}-- units of conformance for ATU-R agentadslAturLineGroup OBJECT-GROUPOBJECTS{
adslLineCoding
}STATUScurrentDESCRIPTION"A collection of objects providing configuration
information about an ADSL Line on the ATU-R side."::={ adslGroups 14}adslAturPhysicalGroup OBJECT-GROUPOBJECTS{
adslAtucInvVendorID,
adslAtucInvVersionNumber,
adslAtucCurrOutputPwr, adslAtucCurrAttainableRate,
adslAturInvSerialNumber, adslAturInvVendorID,
adslAturInvVersionNumber, adslAturCurrSnrMgn,
adslAturCurrAtn, adslAturCurrStatus,
adslAturCurrOutputPwr, adslAturCurrAttainableRate,
adslAtucCurrStatus
}STATUScurrentDESCRIPTION"A collection of objects providing physical
configuration information of the ADSL Line on the
ATU-R side."::={ adslGroups 15}adslAturChannelGroup OBJECT-GROUPOBJECTS{
adslAtucChanInterleaveDelay, adslAtucChanCurrTxRate,
adslAtucChanPrevTxRate,
adslAturChanInterleaveDelay, adslAturChanCurrTxRate,
adslAturChanPrevTxRate, adslAturChanCrcBlockLength
}STATUScurrentDESCRIPTION"A collection of objects providing configuration
information about an ADSL channel on the ATU-R
side."::={ adslGroups 16}adslAturAtucPhysPerfRawCounterGroup OBJECT-GROUPOBJECTS{
adslAtucPerfLofs, adslAtucPerfLoss,
adslAtucPerfESs, adslAtucPerfInits
}STATUScurrentDESCRIPTION"A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end) provided by the
ATU-R agent."::={ adslGroups 17}adslAturAtucPhysPerfIntervalGroup OBJECT-GROUPOBJECTS{
adslAtucPerfValidIntervals,
adslAtucPerfInvalidIntervals,
adslAtucPerfCurr15MinTimeElapsed,
adslAtucPerfCurr15MinLofs, adslAtucPerfCurr15MinLoss,
adslAtucPerfCurr15MinESs, adslAtucPerfCurr15MinInits,
adslAtucPerfCurr1DayTimeElapsed,
adslAtucPerfCurr1DayLofs, adslAtucPerfCurr1DayLoss,
adslAtucPerfCurr1DayESs, adslAtucPerfCurr1DayInits,
adslAtucPerfPrev1DayMoniSecs,
adslAtucPerfPrev1DayLofs, adslAtucPerfPrev1DayLoss,
adslAtucPerfPrev1DayESs, adslAtucPerfPrev1DayInits,
adslAtucIntervalLofs, adslAtucIntervalLoss,
adslAtucIntervalESs, adslAtucIntervalInits,
adslAtucIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing current
15-minute, 1-day; and previous 1-day performance
counts on ADSL Line (ATU-C end) provided by the
ATU-R agent."::={ adslGroups 18}adslAturAturPhysPerfRawCounterGroup OBJECT-GROUPOBJECTS{
adslAturPerfLofs, adslAturPerfLoss,
adslAturPerfLprs, adslAturPerfESs
}STATUScurrentDESCRIPTION"A collection of objects providing raw performance
counts on an ADSL Line (ATU-R end) provided by the
ATU-R agent."::={ adslGroups 19}adslAturAturPhysPerfIntervalGroup OBJECT-GROUPOBJECTS{
adslAturPerfValidIntervals,
adslAturPerfInvalidIntervals,
adslAturPerfCurr15MinTimeElapsed,
adslAturPerfCurr15MinLofs, adslAturPerfCurr15MinLoss,
adslAturPerfCurr15MinLprs, adslAturPerfCurr15MinESs,
adslAturPerfCurr1DayTimeElapsed,
adslAturPerfCurr1DayLofs, adslAturPerfCurr1DayLoss,
adslAturPerfCurr1DayLprs, adslAturPerfCurr1DayESs,
adslAturPerfPrev1DayMoniSecs,
adslAturPerfPrev1DayLofs, adslAturPerfPrev1DayLoss,
adslAturPerfPrev1DayLprs, adslAturPerfPrev1DayESs,
adslAturIntervalLofs,
adslAturIntervalLoss, adslAturIntervalLprs,
adslAturIntervalESs, adslAturIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing current
15-minute, 1-day; and previous 1-day performance
counts on ADSL Line (ATU-R end) provided by the
ATU-R agent."::={ adslGroups 20}adslAturAtucChanPerformanceGroup OBJECT-GROUPOBJECTS{
adslAtucChanReceivedBlks,
adslAtucChanTransmittedBlks,
adslAtucChanCorrectedBlks,
adslAtucChanUncorrectBlks,
adslAtucChanPerfCurr15MinTimeElapsed,
adslAtucChanPerfCurr15MinReceivedBlks,
adslAtucChanPerfCurr15MinTransmittedBlks,
adslAtucChanPerfCurr15MinCorrectedBlks,
adslAtucChanPerfCurr15MinUncorrectBlks,
adslAtucChanPerfCurr1DayTimeElapsed,
adslAtucChanPerfCurr1DayReceivedBlks,
adslAtucChanPerfCurr1DayTransmittedBlks,
adslAtucChanPerfCurr1DayCorrectedBlks,
adslAtucChanPerfCurr1DayUncorrectBlks,
adslAtucChanPerfPrev1DayMoniSecs,
adslAtucChanPerfPrev1DayReceivedBlks,
adslAtucChanPerfPrev1DayTransmittedBlks,
adslAtucChanPerfPrev1DayCorrectedBlks,
adslAtucChanPerfPrev1DayUncorrectBlks,
adslAtucChanPerfValidIntervals,
adslAtucChanPerfInvalidIntervals,
adslAtucChanIntervalReceivedBlks,
adslAtucChanIntervalTransmittedBlks,
adslAtucChanIntervalCorrectedBlks,
adslAtucChanIntervalUncorrectBlks,
adslAtucChanIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end) provided by the ATU-R agent."::={ adslGroups 21}adslAturAturChanPerformanceGroup OBJECT-GROUPOBJECTS{
adslAturChanReceivedBlks,
adslAturChanTransmittedBlks,
adslAturChanCorrectedBlks,
adslAturChanUncorrectBlks,
adslAturChanPerfValidIntervals,
adslAturChanPerfInvalidIntervals,
adslAturChanPerfCurr15MinTimeElapsed,
adslAturChanPerfCurr15MinReceivedBlks,
adslAturChanPerfCurr15MinTransmittedBlks,
adslAturChanPerfCurr15MinCorrectedBlks,
adslAturChanPerfCurr15MinUncorrectBlks,
adslAturChanPerfCurr1DayTimeElapsed,
adslAturChanPerfCurr1DayReceivedBlks,
adslAturChanPerfCurr1DayTransmittedBlks,
adslAturChanPerfCurr1DayCorrectedBlks,
adslAturChanPerfCurr1DayUncorrectBlks,
adslAturChanPerfPrev1DayMoniSecs,
adslAturChanPerfPrev1DayReceivedBlks,
adslAturChanPerfPrev1DayTransmittedBlks,
adslAturChanPerfPrev1DayCorrectedBlks,
adslAturChanPerfPrev1DayUncorrectBlks,
adslAturChanIntervalReceivedBlks,
adslAturChanIntervalTransmittedBlks,
adslAturChanIntervalCorrectedBlks,
adslAturChanIntervalUncorrectBlks,
adslAturChanIntervalValidData
}STATUScurrentDESCRIPTION"A collection of objects providing channel block
performance information on an ADSL channel
(ATU-R end) provided by the ATU-R agent."::={ adslGroups 22}adslAturLineAlarmConfProfileGroup OBJECT-GROUPOBJECTS{
adslAtucThresh15MinLofs, adslAtucThresh15MinLoss,
adslAtucThresh15MinESs, adslAtucThreshFastRateUp,
adslAtucThreshInterleaveRateUp,
adslAtucThreshFastRateDown,
adslAtucThreshInterleaveRateDown,
adslAtucInitFailureTrapEnable,
adslAturThresh15MinLofs, adslAturThresh15MinLoss,
adslAturThresh15MinLprs, adslAturThresh15MinESs,
adslAturThreshFastRateUp,
adslAturThreshInterleaveRateUp,
adslAturThreshFastRateDown,
adslAturThreshInterleaveRateDown
}STATUScurrentDESCRIPTION"A collection of objects providing alarm
provisioning
information about an ADSL Line provided by the
ATU-R agent."::={ adslGroups 23}adslAturLineConfProfileControlGroup OBJECT-GROUPOBJECTS{
adslLineAlarmConfProfile,
adslLineAlarmConfProfileRowStatus
}STATUScurrentDESCRIPTION"A collection of objects providing profile
control for the ADSL system by the ATU-R agent."::={ adslGroups 24}adslAturNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{
adslAtucPerfLofsThreshTrap,
adslAtucPerfLossThreshTrap,
adslAtucPerfESsThreshTrap,
adslAtucRateChangeTrap,
adslAturPerfLofsThreshTrap,
adslAturPerfLossThreshTrap,
adslAturPerfLprsThreshTrap,
adslAturPerfESsThreshTrap,
adslAturRateChangeTrap
}STATUScurrentDESCRIPTION"The collection of ADSL notifications implemented by
the ATU-R agent."::={ adslGroups 25}END